Use some mild detergent or soapy water and a cloth. Spread the detergent with the dampened cloth over the mousepad, rub for some time then rinse with water. Best artisan mousepad for csgo? His control, again, is better than that of other carpets with similar speed, stopping ability is also great. via vistacreate The Artisan Hien comes in small mediu, large and extra large, here are the corresponding dimensions. S Any Hayate mousepad felt less textured and smoother and more pleasant to the touch than Hien mousepad. The exception is mousepads with an adhesive surface (Razer, Sphex mousepad, which was glued to the table).

Artisan Hien is the 2nd most popular mousepad. Well-constructed mousepad. Has a little bit of rough texture. If you’re not sure about more speed or more control, we would suggest the Hien. It will be your endgame mousepad. The glide is also not influenced by humidity or perspiration. Plug'n'play kind of mousepad. I found the Soft Hien plenty fast, but not insanely fast like the SkyPad 3.0 for example. There was still plenty of stopping power to play tactile shooters like CS:GO and Valorant. The underside of the pad does a good job maintaining a strong grip on my wooden desk and white ikea desk equally as well. Has bumps on sides of the pad, collects dust really easily, does not lay flat after months of use. Less stiff version of MP510 fabric. The pad comes with three softness levels, XSOFT being the slowest, SOFT is the midrange and MID with the fastest overall speed.

Major Quality Control issues with surface finish (major issue). Spins out on anything that isn’t Hero. It is suitable specifically for control in motion, and the mousepad is much faster than zero in speed. So, a lot of people seem to keep asking the same questions regarding Artisan Pads, which hardness should I get?

Moreover, the synthetics themselves are somewhat rough to the touch, so you have to deal with it for some time. It has a very rough, highly textured surface artisan Hien mousepad, and when you move the mouse, you get the feeling that you are traveling along the pavement, along the cobblestones. There is compatibility with the surface of the desk where the mouse pad is placed, so it may fail two or three times. However, cheap investment as it can be used for several years if matches can be obtained.Stiffer version of ROG Scabbard fabric. QC issue where weave has Y direction faster than X direction. (sometimes)

Hard bedding substrate does not have any mousepad now, but they seem to resemble those of Zowie G-CM, G-TF mousepads. via vistacreate Classic Artisan pads don’t have a stitched edge while FX Artisan’s do. I recommend spending the extra money for the FX version to prevent any potential fraying on the mouse pad. The stitching on Artisan pads is excellent and do a great job of staying out of the way. Conclusion Literally a little slower. The texture itself is a little more palpable than the usual artisan Hayate. Because of the mid bedding substrate, the mouse movement is extremely stable, easy to start, the glide itself is quite oily, and the surface feels like a weak magnet.The Otsu is slightly slower than the Hien with a smooth texture for the folks that find the Hien texture too much. Kou Dust collects good, and it is cleaned quite poorly. That is, over time, you have to clean this mousepad with a brush quite often.

Mousepads themselves are reliable (they will not be fluffy and preserve their properties for a long time), however, they require care and careful use. A lot of people diss this hardness but I gotta say, on the Raiden or Shidenkai, this is niiiiiiice. The point is to use re-peeling double-sided tape. It tape easy to peel off. Paste at the corners of the sole of the mouse pad and the middle of it. Paste the tape cut to about 2 cm in length. It can to prevent shift perfectly. Quite hard and looks more like dense foam rubber-like Kinston HyperX Fury mousepad or QPad UC mouse pad. Soft mousepad I was worried how the texture would trap dirt and grime, but so far so good. Design & Dimensions Surface

Artisan is a mousepad manufacturer from Japan. Their mousepads are known to be the endgame of mousepads. They build their mousepads with high-quality fabrics. The weaves are tight and precise which makes the quality control spectacular. Since the Mid substrate is practically not deformed, mousepads are obtained a little faster than their counterparts with the XSoft substrate, but at the same time, some control and viscosity are lost. The stitching is definitely high quality, all of the stitching sits below the mouse pad surface level so avoid any collisions on the sides of the pad. I have some little fray I think from where they start the stitching, but I don’t expect it to get any worse. Colors The Kou is a medium speed pad with a large X-Y differential, the Y-axis is much faster than the X-axis on this mousepad. Finger tip grippers might like this aspect of the mouse pad, but I think it’s more a niche pad. Raiden I hope this helps answer your questions, as this is perhaps the most confusing aspect of Artisan pads. Also link this anytime this question comes up and save us the trouble.