5 kg Multifunctional 200g large chlorine tablets for swimming pools

Product Information

Stabilised chlorine tablets are a slow-dissolving dose of chlorine that’s released into the water over time. It’s a low-maintenance way of keeping on top of your cleaning routine, reducing the work you have to put into cleaning your pool. As a pool owner, you’ll know that keeping the water sanitised with chlorine is crucial. Chlorine ensures the pool stays clean and free of bacteria. Whether you’re new to owning a pool or you’re an expert in pool maintenance, you’ll know the importance of keeping everything clean and clear of any bacteria that could make the water unsafe for swimming. To do this effectively, you’ll need to invest in good-quality disinfectant – and the most common disinfectant is chlorine. Your pool cleaning routine is made easy when you choose our 200g stabilised chlorine tablets in 5kg tubs. These are straightforward to use and sure to keep harmful bacteria and germs at bay.

Apply regularly to achieve the recommended free chlorine level of 3-5 mg/l (ppm) for hot tubs or 1-3 mg/l (ppm) for swimming pools. These tablets are slow release and long lasting and have the minimum effect on the pH of the water for a stabilised chlorine tablet. Used alongside algaecide and flocculant , these chlorine tablets will ensure your pool is safe to swim in. Need some help? Alternatively keep the dispenser aperture constant and vary the tablets inside to achieve 1–3 mg/l (ppm) These chlorine tablets are one of the most popular products for ensuring swimming pool water is safe and bacteria freeFloating dispenser: This takes around 10 to 14 days to fully dissolve and one tablet is required per 7,000 gallons of water. You’ll need to make sure the dispenser is thoroughly cleaned before you add the tablet. For skimmer baskets: Fill the basket with 2/3 tablets and monitor levels to maintain 1-3 mg/l (ppm) chlorine levels.

Place One tablet in the skimmer basket per 45,450 litres (10,000 gallons) and adjust tablet numbers as necessary to take account of your water flow to achieve 1 - 3 mg/l (ppm) free chlorine relatively consistently. Few feeders take this 200g tablet and the 20g smaller tablet may be required. However, if appropriate, fill the dispenser and follow the feeder instruction manuals on flow regulations to maintain 1-3mg/l (ppm) chlorine levels. General PrecautionsStabilised chlorine tablets are a simple yet effective way to keep on top of good pool hygiene. They are easy to use and gradually dissolve over time, ensuring a constant supply of chlorine in the water. n\nKey Features\n\nIts best to operate a free Chlorine Range of 3 – 5mg/l for hot tubs and 1-3mg/l for swimming pools In a floating dispenser, fill the floating dispenser with tablets and adjust the aperture mechanism at the bottom of the dispenser to obtain the 1-3 mg/l (ppm) desire range. Alternatively keep the dispenser aperture constant and vary the tablets inside to achieve 1-3 mg/l (ppm). The dispenser should be removed from the pool while swimmers are bathing. Typically, it’s best to aim for a chlorine level of 1-3ppm in your water to get the levels right. Need some advice? Prior to using this product, adjust the pH levels to the ideal range of 7.2 - 7.6 to promote bather comfort, plant protection and effective chemical use.

Do not add the tablets directly to your pool; they have a high chlorine content. Always use a clean applicator according to the directions below, with no other products present. Using this product is easy and we recommend using a pool skimmer or dispenser. If you’re using a skimmer, use one tablet per 10,000 gallons of water which takes 5-7 days to dissolve. A dispenser will use one tablet per 7,000 gallons of pool water which dissolves in 10-14 days. IMPORTANT - DO NOT ADD DIRECTLY TO A POOL AND ALWAYS USE A CLEAN APPLICATOR AS BELOW WITH NO OTHER CHEMICAL PRODUCTS PRESENT. Floating Dispenser Floating Dispenser: Fill the Trichlor floating dispenser with tablets and adjust the aperture mechanism at the bottom of the dispenser to obtain the 1–3 mg/l (ppm) desired range. Alternatively keep the dispenser aperture constant and vary the tablets inside to achieve 1–3 mg/l (ppm). The dispenser should be removed from the pool while swimmers are bathing.Dose rate is normally 1 to 2 tablets (placed into the skimmer basket, floating dispenser or chlorine feeder) per 45,450 litres (10,000 gallons) of water. The number of tablets required will depend on pool usage and weather conditions. Apply regularly to achieve the recommended free chlorine level of 3-5 mg/l (ppm) for hot tubs or 1-3 mg/l (ppm) for swimming pools. These tablets are slow release, long lasting and have a minimum effect on the pH of the water for a tablet.